Bo mạch chủ mainboard workstation intel dual LGA 2011 E5 2670 mạnh gấp 2 i7

10.150.000

Mua ngay

Mô tả

Thông số kỹ thuật cho bo mạch chủ

Bo mạch chủ: Foxconn OEM

(Bo mạch chủ Supermicro X9Dri-LN4F hoặc X9DR3-F +2.000.000 đ)

Hersteller: Supermicro

Supermicro X9DRI-F

  • Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
  • Intel® C602 chipset; QPI up to 8.0GT/s
  • Up to 1 TB ECC DDR3, up to 1866 MHz; 16x DIMM sockets
  • Expansion slots: 3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x8
  • Intel i350 Dual port GbE LAN
  • 8x SATA2 and 2x SATA3 ports
  • Integrated IPMI 2.0 and KVM with Dedicated LAN
  • 11x USB 2.0 ports (4 rear, 6 via header + 1 Type A)

Product SKUs

MBD-X9DRi-F -O X9DRi-F (Standard Retail Pack)
MBD-X9DRi-F -B X9DRi-F (Bulk Pack)

Physical Stats

Form Factor E-ATX
Dimensions 12″ x 13″ (30.5cm x 33.2cm)

Processor/Cache

CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
  • (up to 135W TDP **)
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache Up to 30 MB
System Bus QPI up to 8 GT/s

System Memory

Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Up to 1 TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB, 64 GB LRDIMM
Memory Voltage 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel C602 chipset
AHCI SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SCU SATA (Storage Controller) SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel i350 Dual port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video Matrox G200eW

Input / Output

AHCI SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SCU SATA 4 SATA 2.0 ports (3Gb/s)
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB 11 USB 2.0 ports total(4 rear + 6 via header + 1 Type A)
Video 1x VGA port
Serial Port / Header 2 Fast UART 16550 ports: 1 rear and 1 header
DOM 1x DOM (Disk on Module) power connector
TPM 1 TPM 1.2 20-pin Header

Chassis (Optimized for X9DRi-F )

2U Chassis CSE-825TQ-R740LPB
3U Chassis CSE-835TQ-R920B
Tower / 4 U Rackmount CSE-745TQ-R920B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis are recommended.
  • Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis

SuperServer(s) with X9DRi-F

Model(s)
  • SYS-6027R-TRF
  • SYS-7047R-TRF

Expansion Slots

PCI-Express
  • 3x PCI-E 3.0 x16 slots
  • 3x PCI-E 3.0 x8 slots
  • (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)

System BIOS

BIOS Type 128 Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1

Management

Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Main Switch Override Mechanism
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery

PC Health Monitoring

Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • I²C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support

Operating Environment

Operating Temperature Range 10°C – 35°C (50°F – 95°F)
Non-Operating Temperature Range -40°C – 70°C (-40°F – 158°F)
Operating Relative Humidity Range 8% – 90% (non-condensing)
Non-Operating Relative Humidity Range 5% – 95% (non-condensing)

Hình ảnh cho bo mạch chủ